Home 
Equipment for sugar industry •The equipment for limy kiln Swivel Loading Unit for Lime Kiln / Lime Kiln Distribution Unit
Equipment for sugar industry •The equipment for limy kiln Swivel Loading Unit for Lime Kiln / Lime Kiln Distribution Unit
Desingned for receiving the change from the skip hoist and loading it into the kiln. For uniform distribution of the change, prior to loading of the next portion the hopper is turned at a certain angle.
The unit is composed of swivel hopper 1, shutoff cone 2, level 3 and tie-rod 4. Lifting of the cone and turning of the hopper are effected by drives 5 and 6.
 |
 |
Technical data
| Hopper caracity, m³ | 2,5 |
| Hopper rotation speed, min-1 | 1,39 |
| Time of gate opening/closing cycle, s | 6,8 |
| Installed power of motors, kW: | |
| hopper rotation motor | 1,1 |
| gate drive motor | 4,0 |
| Overall dimensions, mm | |
| lenght | 2680 |
| width | 2500 |
| height | 4680 |
| Weight, kg | 2400 |
Lime Kiln Distribution Unit
Intended for uniform distribution of a portion of charge along the kiln cross-sectional area at the present rate loading. The unit is installed inside the kiln. Supplied complete with the charging unit.
